EDP :
20-pin industry-standard dual-channel eDP interface (eDP 1.1), supporting 1–4 lane modes, with a maximum output of 1080P
Amplifier Output :
8 Ohm 10W Dual Audio Amplifier Output
Fill Light :
12V fill-light interface with PWM support
Backlight Control :
Industry standard LCD backlight control header, support for backlight switch and brightness adjustment
Ambient Requirement :
Working temperature 0°~70°, working humidity 0%~95% (non-condensing)
DDR :
LPDDR-III 2GB (4GB optional)
Light Sensor :
Analog and digital input ambience light sensor port
MiniPCI-E 4G :
Industry standard MiniPCI-E 4G module interface with Nano-SIM card socket
DC Input :
Supports 9~15V wide voltage DC power input
MIPI-CSI :
One 30-Pin FPC MIPI-CSI camera port
Wiegand Interface :
Standard two-wire Wiegand signal input interface (integrated into the access control connector)
System Expansion :
The integrated interface connector provides 12V power input, 5V power output, two independent USB Host ports, one multiplexed USB OTG port, a boot/download button, a power button, a reset button, and two GPIO pins.
LED Indicator Light :
Three-color LED indicator for standby, network and running
MIPI-DSI :
31-Pin FPC MIPI-DSI display port supporting up to 1920x1200
Serial Ports :
1 TTL/RS-232/RS-485 compatible, 3 TTL/RS-232 compatible
Line Output :
Support standard left and right channel line output (pin header)
USB 2.0 Interface :
2 x external horizontal USB ports (single-deck socket), 4 x internal pin-header USB ports, 2 x external expansion pin-header ports, and 1 x MicroUSB socket.
Real Time Clock :
Ultra-low power RTC circuit (with CR1220 coin cell battery), supports scheduled power-on/off
Model Number :
F3X Mainboard
Place of Origin :
China
MOQ :
Negotiable
Price :
Negotiable
Payment Terms :
T/T
Supply Ability :
200+/day
Wi-Fi :
Built-in high performance SDIO interface WiFi module, support IEEE 802.11 b/g/n
Buttons :
Recovery (flash) button and power/reset pin header interface
Door Control :
The access control interface connector integrates 12V power input, 5V power output, two serial ports (UART), one SPDT access control relay signal, Wiegand input, Wiegand output, door open input, tamper/sensor input, alarm input, doorbell output, and alarm
Infrared RC :
Standard infrared remote control receiver and infrared receiver pin header
Size :
Length*Width*Height (145mm*80mm*9mm), PCB top side height 7mm
Micro SD Card :
Push-push TF card socket, supporting TF cards up to 128GB
I2C Bus :
I2C pin header for I2C capacitive screen and etc.
Storage :
The default comes with an 16GB EMMC NAND chip that can scale up to 128GB
GPIO Signals :
5 x GPIO signal pins for expanding GPIO keys and/or 3.3V I/O.
LVDS :
30-pin industry-standard dual LVDS supporting VESA/JEITA format up to 1080P output
Camera :
Supports USB cameras up to 2MP and 1 x MIPI camera interface
Delivery Time :
5-8 work days
CPU :
RK3288 Cortex-A17 quad-core, up to 1.6GHz
Fan Port :
12V fan power supply port
MIC Input :
Single-end MIC input (pin header)
Android Version :
Recommended Android 5.1; Optional Android 6.0 and 7.1
Bluetooth :
Built-in high performance serial interface BT module (optional) with support for V2.1+EDR/BT v3.0/BT v3.0+HS/BT v4.0
Ethernet :
10/100M Adaptive Ethernet RJ45 connector
Contact Now
