MIPI+DVP :
40-Pin FPC MIPI+DVP dual camera port
USB 2.0 Interface :
1 x external vertical USB port (compatible with both Device and Host modes), plus 6 x internal pin-header USB ports
Fan Port :
12V fan power supply port
I2C Bus :
I2C pin header and FPC for I2C capacitive screen and etc.
Android Version :
Recommended Android 8.1
Model Number :
F1-i Mainboard
Place of Origin :
China
MOQ :
Negotiable
Price :
Negotiable
Payment Terms :
T/T
Supply Ability :
200+/day
DDR :
LPDDR-III 1GB (2GB optional)
Micro SD Card :
1 x push-push TF card socket (supports up to 128GB). Note: Shares pins with KIO interface – only one function can be used at a time.
GPIO Signals :
5 x GPIO signal pins for expanding GPIO keys and/or 3.3V I/O. Note: Multiplexed with TF card socket – only one function can be used at a time.
Size :
Length*Width*Height (100mm*62mm*25mm), PCB top side height 18mm
Amplifier Output :
8 Ohm 10W Dual Audio Amplifier Output
Door Control :
1 x SPDT access control relay interface (max. 2A)
Light Sensor :
Analog and digital input ambience light sensor port
Battery Supply :
Supports 2-cell Li-ion battery power supply (8.4V) and charging
Line Output :
Support standard left and right channel line output (pin header)
Bell Control :
Bell switch relay interface (max.1A)
MIC Input :
Single-End MIC input (pin header)
Serial Ports :
1xTTL/RS-232/RS-485, 1xTTL/RS-232, 1xTTL
DC Input :
Supports 9~15V wide voltage DC power input
Delivery Time :
5-8 work days
CPU :
PX30 Cortex-A35 quad-core, up to 1.5GHz
Camera :
Support USB camera within 2 million pixels
Wiegand Interface :
Standard two-line Wiegand input and output port
Backlight Control :
Industry standard LCD backlight control header, support for backlight switch and brightness adjustment
Infrared RC :
Standard infrared remote control receiver and infrared receiver pin header
LED Port :
4 x LED driver interfaces for on/off control (supports up to 4 colors)
Real Time Clock :
Ultra-low power RTC circuit (with CR1220 coin cell battery), supports scheduled power-on/off
Storage :
The default comes with an 16GB EMMC NAND chip that can scale up to 128GB
LED Indicator :
1 x SMD system status LED (indicates system operation)
MIPI-DSI :
31-pin FPC MIPI-DSI, supporting up to 1920x1200 output. Note: MIPI and LVDS outputs cannot be used simultaneously. The motherboard defaults to a single output format, and switching between formats requires changing resistor solder joints.
Bluetooth :
Built-in high performance serial interface BT module (optional) with support for V2.1+EDR/BT v3.0/BT v3.0+HS/BT v4.0
WiFi :
Built-in high performance SDIO interface WiFi module, support IEEE 802.11 b/g/n
Buttons :
2 x vertical push buttons (for bootloader/recovery and reset), 3 x side push buttons (VOL+, VOL-, and power)
Ethernet :
10/100M Adaptive Ethernet RJ45 connector
Ambient Requirement :
Working temperature 0°~70°, working humidity 0%~95% (non-condensing)
Contact Now
